
3 needle paper felt ringlike needle machine
Category:
3 needle paper felt ringlike needle machine

Hotline:
Product details
Performance
The whole machine has three needle areas, the upper double-needle-area, the lower single-needle-area,the center sill support bed (is of the rotary arm crosssill type,
and the carpet tension adopts the three-roll automatic exchange and tension data display. We also provide auxiliary 9.2-meter specification pre-needle machine and 9.6-meter lapping machine. )
Main specifications
Effective width: 3.5, 4.8, 6.2, 8.4, 9.6m
Bestock: 3000-4000needles/meter (as per
American Molison Needle Arrangement)
Needle frequecy: 150~600 times/minute (art frequency 450 times/minute)
Stroke: 40mm
Fabrics feeding speed: 0.5~8 meters/minute (frequency conversion speed regulation)
3 needle paper felt ringlike needle machine:
This machine is in the form of upper and lower needle areas; Adopt the rotary arm type form structure; The upper needle area adopts the form of single shaft single needle plate crankcase, and a single oil pump circulates oil supply structure. The lower needle area adopts the whole box type single needle board balance slider form. Oil pump circulation structure; Top dead center brake device is equipped on the upper and lower needle spindles. The main panel is made of Luoyang pressed aluminum and magnesium alloy material. The supporting and stripping net plate is made of 14mm steel plate; Both ends are equipped with a small guide post mechanism. The surface is coated with hard lowe. The main machine is equipped with large and small cars. Supporting fine-tuning device structure on the small car; And equipped with rising force sensor display. Large and small cars are equipped with brake structures. The main machine and feed drive adopt frequency conversion control. Supporting, stripping net using electric control; Lifting data using slider potentiometer device, and limited function. The machine is equipped with frequency display, in and out of the roller line speed display. One end of the rotary beam is equipped with a column structure, and the other end is equipped with a return locking device. The machine frame is made of special materials and tempered to eliminate stress. Acupuncture frequency: 800 times/min; Total installed power: 93KW.
Previous page
None
Next page